cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
283
Views
0
Helpful
1
Replies

servers in different vlans encountered NFS timeout

christina_neo
Level 1
Level 1

Hi,

Would appreciate some advise on the following:

background

----------

server1(e.g.vlan10) and server2(e.g.vlan20) experienced NFS timeout. Starting from server1 to server2, they are 6 hops away. ping is ok.

1) is 6 hops too far away? or

2) should the arp aging time on router and mac address aging time on switches set close to each other?

3) any other suggestions?

Thanks,

christina

1 Reply 1

aghaznavi
Level 5
Level 5

show port command displays whether the port is connected, what VLAN it is in, what speed/duplex it is running at, channel information, errors, etc.These errors should be helpful in troubleshooting the issue.Refer the following URL for more info

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfd6.shtml#Using_Basic_Troubleshooting_Commands

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: