07-26-2006 01:23 AM - edited 03-03-2019 04:14 AM
Pls help me in configuring DHCP server in a Catalyst 4948 switch to deliver Ip's to a particular Vlan and intervlan routing .
07-26-2006 01:41 AM
I can't ensure that Cat4k can support DHCP server but it do support DHCP relay. Please check below link for the sample and try to configure it.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a008008743b.html
http://www.cisco.com/en/US/products/ps6021/products_installation_and_configuration_guides_list.html
Please advise if you find any information that indicated Cat4k support DHCP server.
Hope this helps.
07-26-2006 10:19 PM
4948 is an IOS based platform that supports L3 functions such as inter-vlan routing. It supports IOS based DHCP server much like a regular router:
DHCP Server on IOS configuration example on the router:
ip dhcp excluded-address 172.16.1.100 172.16.1.103
ip dhcp excluded-address 172.16.2.100 172.16.2.103
!
ip dhcp pool 0
network 172.16.0.0 /16
domain-name cisco.com
dns-server 172.16.1.102 172.16.2.102
netbios-name-server 172.16.1.103 172.16.2.103
netbios-node-type h-node
!
ip dhcp pool 1
network 172.16.1.0 /24
default-router 172.16.1.100 172.16.1.101
lease 30
!
ip dhcp pool 2
network 172.16.2.0 /24
default-router 172.16.2.100 172.16.2.101
lease 30
Please rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide