×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Undersize Errors

Unanswered Question
Jul 30th, 2006
User Badges:

Hey all. We are we having some hard to pinpoint errors on our net, so I tried "sho int count err". I am getting many (probably 100 or so a minute) undersize errors on the 3560 port that connects to my 2801. Anything to worry about? (Our errors are entirely data related, see my other thread "3560s Letting me Down!")

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jackyoung Sun, 07/30/2006 - 22:44
User Badges:
  • Gold, 750 points or more

Referring to Cisco doc.:


Undersize Packets

The total number of packets received of less than 64 bytes that have good FCS values.



Another one


http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00800a7af0.shtml


Undersize error

This is an indication of a bad frame generated by the connected device.

What is the interface status at 2801.


Actions

This Discussion