password code to access the PSTN

Unanswered Question
Aug 2nd, 2006
User Badges:

Hi all


I have a CCME ver4 in a router 2811 with 4 fxo ports to PSTN and 20 ip phones.


I need establish password code by users to have different type the access to the PSTN (local, LD, LDI), and that the phone number and code password appear in the report call history, to control the users.


The router have a COR configuration but work by phone and not by user.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
thisisshanky Wed, 08/02/2006 - 18:19
User Badges:
  • Purple, 4500 points or more

There seem to be a TCL script in CME 4.01 ( i have never seen this script yet) according to this link, that can authorize pins and if pin is valid, the call is allowed.

FAC script can check the pin with an external Radius server.


http://www.cisco.com/hk/learning/showcase/files/Depolying_CME_and_CUE_Deployment_Management_Security.pdf



PS:please remember to rate posts!


orangel Thu, 08/03/2006 - 07:32
User Badges:

hi thisisshanky


I do not have experience in TCL script's, like can to obtain greater data or some example of configuration?


and if exist additional requirements in software or hardware

Actions

This Discussion