AP1200 and Switch Cisco Express 500

Unanswered Question
Aug 3rd, 2006
User Badges:

Hi,


We have an AP1200 (port 1) attached to a switch cisco express 500,in this switch we are using a Vlan and we have a DHCP server.

The problem is when a new PC tries to connect to this AP, it takes to much time to assign the IP address, and in other cases the PC is disconnected from the System constantly. Do you know wich could be the problem ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Aaron Harrison Fri, 08/04/2006 - 08:45
User Badges:
  • Super Bronze, 10000 points or more
  • Community Spotlight Award,

    Member's Choice, May 2015

It sounds like it could be a problem with your wireless signal - have your tried doing a carrier busy test on the AP to check for interference?


Regardsd


Aaron


Please rate helpful posts.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode