08-04-2006 02:59 AM - edited 03-03-2019 04:21 AM
Hello,
On a Catalyst 4506, where can I see the VTP saved configuration (VTP mode, VTP Domain name,...)? In which file ? Or with which command ?
Because show run does not make it appear !
And the VLAN config also ?
Thank you
Patrice
08-04-2006 03:13 AM
Hi,
the vtp stuff is not in the running config, but in the vlan.dat in flash.
Use "show vtp status" to see what the current status of your switch is.
Switch#show vtp status
VTP Version : 2
Configuration Revision : 12
Maximum VLANs supported locally : 250
Number of existing VLANs : 13
VTP Operating Mode : Client
VTP Domain Name : MyVTP1
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xCB 0x1E 0xF2 0x66 0xE4 0x67 0xCD 0x57
Configuration last modified by 0.0.0.0 at 3-2-93 17:02:57
show vtp password
sh vtp counters
VTP statistics:
Summary advertisements received : 76
Subset advertisements received : 27
Request advertisements received : 0
Summary advertisements transmitted : 71
Subset advertisements transmitted : 22
Request advertisements transmitted : 0
Number of config revision errors : 1
Number of config digest errors : 0
Number of V1 summary errors : 0
VTP pruning statistics:
Trunk Join Transmitted Join Received Summary advts received from
non-pruning-capable device
---------------- ---------------- ---------------- ---------------------------
Fa0/1 0 0 0
Fa0/2 0 0 0
Hope this helps! Please rate all posts.
Regards, Martin
08-04-2006 03:44 AM
VLAN related configurations are stored in vlan.dat file.
For example:to set the VTP domain name to NULL (factory default) you can do this only with deleting the vlan.dat file. (it's a binary file not text)
And also show vlan command is useful to check the VLAN database...
bye
FCS
Please rate me if I helped.
08-04-2006 04:51 AM
Thank you FCS.
08-04-2006 04:40 AM
Martin,
Thank you, but when I do : show bootflash, I think I do not see the file vlan.dat,do you know why ?
Patrice
08-04-2006 04:55 AM
Check the flash the vlan.dat should be there...
bye
FCS
Please rate me if I helped.
08-04-2006 05:20 AM
OK, I will look more precisely, thank you FCS.
Patrice
08-04-2006 10:20 AM
You will not find vlan.dat on this platform on bootflash: or flash: or nvram:. It's in the cat4000_flash: file directory:
cat4000# dir ? >>> you should see all the filesystem directory. And you should see "cat4000_flash:", if you then do this:
cat4000#dir cat4000_flash:
Directory of cat4000_flash:/
1 -rw- 2116
524280 bytes total (522164 bytes free)
To copy it to tftp server:
cat4000#copy cat4000_flash:vlan.dat tftp
Address or name of remote host []? 10.1.1.1
Destination filename [vlan.dat]?
As you can see above it's in the cat4000_flash:, that's NOT flash or bootflash or nvram.
Please rate the posts if it helped or resolve this issue.
08-05-2006 12:45 PM
Bosalaza,
Thanks a lot, because effectively it does not appear in bootflash.
Patrice
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide