×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

config file from TFTP server

Unanswered Question
Aug 6th, 2006
User Badges:

Hi,

i have a problem with a cisco e-lab at: http://forums.cisco.com/eforum/servlet/PrepCenter?page=more_labs


named: Managing the Startup Configuration File e-Lab.


when I download the configuration file (step 4) from the tftp server, its source and destination name are the same("switch-config").


but the lab prompts me to type "show startup-config" and then "show flash".


I don't get it.


thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
scottmac Sun, 08/06/2006 - 10:59
User Badges:
  • Green, 3000 points or more

"Show Flash" is like doing a "Dir" command in PCDOS / DOS window.


It should show you the files on the flash, presumably so you can check the filename, filesize, and other information (like the MD5 checksum to verify it was a good load).


Good Luck


Scott


Actions

This Discussion