×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Regarding VPN

Unanswered Question
Aug 7th, 2006
User Badges:

Hi Guys,


I have Configured a site-to-site VPN tunnel between pix and VPN 3015

here the problem is the PIx at the remote end doesn't have the public ip .I have terminated the Tunnel at the DSL modem

the tunnel was established and the Data traffic also happens but after 30min or

i hour any one of the IPsec tunnel will not work

i have defined 5 ACl's in there 3 is always accessable (3 Networks)

2 is giving problem

if reboot the pix then every thing will work for 30-45 min then the same problem.

even i have reduced the IPsec lifetime

to 3600 sec

but nothing happens


at last i have decided to Configure the pix and Concentrator as given in the Attached Document


My question is if configured like that does it affcet my exsisting VPn users? (Remote VPN)

Please advice


Thanks

krishna.




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion