PIX 525 NAT

enforcers · ‎08-14-2006

I have a weird situation that I could use some help with.

I have a customer that is using an RFC 1918 range internally. One the remote end of an IPSEC VPN a vendor is using in part some of the same block. I need to be able to NAT two system to new address for bi-directional communication. I also need to be able to let those two original system to be able to access the internet as needed being globally translated to the address already in that pool/interface on the original customer PIX.

mmorris11 · ‎08-14-2006

It's actually pretty common. What you need to do is explore the policy nat features introduced in PIX OS 6.2.

http://www.cisco.com/en/US/customer/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080172786.html#wp1113601

HTH Pls Rate!