×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

WISM and RF Group

Unanswered Question
Aug 17th, 2006
User Badges:
  • Bronze, 100 points or more

We have on Wism version 4.0.155.5. We configured one RF group name for two controllers in the wism and use auto-RF. The problem is each controller can only see itself in the RF group and consider itself as the RF group leader. My understanding is each one should see two controllers in the RF group and only one should be the RF group leader. Where could be wrong?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rupert.wever Sun, 08/20/2006 - 14:11
User Badges:

I may be wrong on this, but I believe the RF groups are actually determined based on what the radios can hear. So an RF group is created for each group of isolated cells (i.e. group of AP's that hear each other within a coverage area).

ethiel Mon, 08/21/2006 - 13:41
User Badges:
  • Gold, 750 points or more

Do you have APs on both WiSMs yet? They will only see other RF group members that have APs associated to them. I had the same issue, but when I moved 1 AP to each WiSM the RF group came up as expected.

zhenningx Tue, 08/22/2006 - 06:26
User Badges:
  • Bronze, 100 points or more

Yes that is helpful! Thanks!

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode