cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
359
Views
0
Helpful
2
Replies

ASA 5510 ip failover

alucky8ball
Level 1
Level 1

Is it possible to configure an ASA 5510 with two different ISP's such that if the main ISP goes down for any reason, it will automatically go to the second ISP? Both of the ISP's will come into the ASA 5510 via cat5, not serially, as 1 is a cable modem and the other is a dsl modem. Thanks, Jeremy Rich

2 Replies 2

a.kiprawih
Level 7
Level 7

Hi,

Check the following link for the PIX/ASA configuration details when connecting to 2 ISPs.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

Rgds,

AK

wongsta
Level 1
Level 1

You would need to be on 7.2(1) code which has the track option. Track allows you to track the ISP connecting interface of your Primary ISP and have a secondary default route with a higher metric to failover to when the Primary ISP fails.

ASA/PIX 7.x to Support Dual ISP Links Configuration Example:

http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

Sincerely,

Norman Wong

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: