08-28-2006 11:45 PM - edited 07-04-2021 12:56 PM
Hello,
anyone can help me find the command to use to deny any host to communicate with an other connected at the same access point?
I have a 1231 Aironet AP.
Thanks,
Omar,
Solved! Go to Solution.
08-29-2006 12:04 AM
Hi Omar
under "interface Dot11Radio0" use:
bridge-group 1 port-protected
For more info:http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a00801d0179.html#wp1038494
Hope this helps
08-29-2006 12:04 AM
Hi Omar
under "interface Dot11Radio0" use:
bridge-group 1 port-protected
For more info:http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a00801d0179.html#wp1038494
Hope this helps
08-29-2006 04:18 AM
In the WebGUI, under the radio config, there's a checkbox labeled "Public Secure Packet Forwarding (PSPF) ... checking that (enabling it) will prevent a client of the access point from accessing another client on the same access point.
Good Luck
Scott
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: