×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cat3750 temperature

Unanswered Question
Sep 3rd, 2006
User Badges:

We are running 3750 ((C3750-IPBASE-M), Version 12.2(25)SEB4).


show env temperature

TEMPERATURE is OK


Is there an OID that we can get to snmp monitor the switch temperature?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
pppyyyppp Sun, 09/03/2006 - 22:24
User Badges:

[root]# snmpwalk -c xxx 1.1.1.1 .1.3.6.1.4.1.9.9.13.1.3

[root]# snmpwalk -c xxx 1.1.1.1 .1.3.6.1.4.1.9.9.13.1

enterprises.9.9.13.1.1.0 = 13

enterprises.9.9.13.1.4.1.2.1004 = "Switch#1, Fan#1, Status is Normal "

enterprises.9.9.13.1.4.1.3.1004 = 1

enterprises.9.9.13.1.5.1.2.1003 = "Switch#1, PowerSupply#1, Status is Normal, RPS Not Present"

enterprises.9.9.13.1.5.1.3.1003 = 1

enterprises.9.9.13.1.5.1.4.1003 = 2


I am actually looking for a temperature value / reading (say the temp of the switch is x deg C). Pls advise how to do about getting the temp readings.

n.bowbridge Mon, 09/04/2006 - 21:19
User Badges:
  • Bronze, 100 points or more

I'm running into the same problem. From what I can find researching on cisco.com the 3750 isn't capable of returning a temperature reading other than OK or alert. According to the 3750 config guide temperature can be monitored with the following command, but as you can see below even with the latest IOS it's unsupported.



Switch#sh env temperature status

Temperature Value: Not Supported

Temperature State: Not Supported

-----

Switch#sh env temperature

TEMPERATURE is OK


http://www.cisco.com/en/US/customer/products/hw/switches/ps5023/products_configuration_guide_chapter09186a00802c10ce.html#wp1208309




sharptroubleshooting Thu, 09/05/2013 - 13:11
User Badges:

All I know is I have this:

cisco WS-C3750V2-48PS (PowerPC405) processor (revision E0)
Processor board ID FDO1348Z1SZ
Model revision number           : E0
Motherboard revision number     : A0
Top Assembly Part Number        : 800-31041-02
Top Assembly Revision Number    : A0
Version ID                      : V02
CLEI Code Number                : COMGW00ARA
Hardware Board Revision Number  : 0x02

Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 52    WS-C3750V2-48PS    12.2(50)SE4           C3750-IPBASEK9-M


and can do this:

ABN-I014-G#sh env all
FAN is OK
TEMPERATURE is OK
Temperature Value: 50 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 66 Degree Celsius
Red Threshold    : 76 Degree Celsius
SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts
--  ------------------  ----------  ---------------  -------  -------  -----
1  Built-in                                         Good

SW  Status          RPS Name          RPS Serial#  RPS Port#
--  -------------   ----------------  -----------  ---------
1   <>              <>

paolo bevilacqua Thu, 09/05/2013 - 13:20
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Just to let you know, you're responding to a 7 years old thread.

Actions

This Discussion