×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
sachinraja Tue, 09/05/2006 - 02:59
User Badges:
  • Red, 2250 points or more

mukhtar,


you can refer to the following document:


http://www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_guide_chapter09186a00800915d0.html


you need to define the community strings and configure the same on the LMS 2.2 box to capture the inventory, software, configuration etc....


Hope this helps.. all the best.. rate replies if found useful..


Raj

Actions

This Discussion