×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
vigleik Sun, 11/05/2006 - 23:37
User Badges:

What if authentication fails, or the PC is not configured for 802.1X ; can the port then give access to a guest vlan or default vlan like we can with other Cisco switches ?


Vigleik

amit-singh Mon, 11/06/2006 - 03:20
User Badges:
  • Blue, 1500 points or more

Hi,


You can do the vlan arrisgnment using 802.1x on CE500. The configuration for 802.1X and Radius authentication server can be done with the help of Cisco Network Assistant (CNA). In the menu Network Security Settings you have to put the

security level on high. There is the possibility to configure the IP address of the RADIUS server and the RADIUS key.


In case you don?t have the CNA, you can download it for free from:


http://www.cisco.com/cgi-bin/tablebuild.pl/NetworkAssistant


HTH, Please rate if it does.


-amit singh


Actions

This Discussion