09-07-2006 11:40 PM - edited 03-03-2019 04:52 AM
Can anybody give me basic PRI configuration . I have connected my pri link to controller e1 1/0 of my router
it is urgent Please
Regards
Mahesh
09-08-2006 12:21 AM
Hi
First of all pls tell its for voice or data?
Regards
JD
09-08-2006 02:13 AM
it is for data jaideep
config may
controller E1 1/0
framing NO-CRC4
pri-group timeslots 1-31
or anything else required
regards
mahesh
09-08-2006 02:43 AM
Hi
Since you are configuring for data...the config will be "channel-group".
I configure for Rel. or Tata 2Mbps e1 unframed mode like following:
contr e1 1/0
channel-group 0 timeslots 1-31 speed 64
framing no-crc4
linecode HDB3
clock source line
serial 0/0:15
ip add
And this works.
Hope that helps.Pls revert back in caseof any prob.
Pls rate helpful posts.
Regards
JD
09-08-2006 09:53 PM
dear jd
i think there is issue with provider link
anyway thanks for your support
regards
mahesh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: