I am running a Cisco Catalyst 3750 with IOS c3750-ipbase-mz.122-25.SEB4.bin
Since we've deployed these switched on our Metro Ethernet network, we are now needing the capability to police/rate-limit the client's ports.
I've done examples on Cisco's docs about QoS in 3750 but can't seem to get it right.
I have mls qos enabled
QoS is enabled
QoS ip packet dscp rewrite is enabled
I have placed this configurations to try to limit client traffic
class-map match-all ANY
match access-group 1
access-list 1 permit any
police 2000000 375000 exceed-action drop
I then apply this to the client interface
description Link to Customer
switchport access vlan 12
service-policy input POLICE-TO-2MB
apparently, the client's input traffic, meaning his upload to me is still exceeding 2Mbits, actually it is still at 95Mbits/sec so I am really confused.
Hope you guys could give me some pointers on how to police all type of traffic on this interface.