09-17-2006 03:42 AM - edited 03-03-2019 05:04 AM
hi,
a switch 2924 ver 11.2 need to upgrade the IOS.
How to check a suitable version?
Thanks!
Samuel
09-17-2006 05:54 AM
Hi Sam,
The lates tis 12.0(5)WC15 which was released on May 2005.
Check the release notes for new features and restrictions and resolved caveats on the latest code.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/2935wc15/ol256211.htm
HTH
Ankur
09-17-2006 07:49 AM
Sam,
Depending upon what kind of 2924 you have, the IOS Version will differ.
For example:
Catalyst 2900 XL 4-MB switches run original edition software and do not support the 12.0(5)WC15 releases.
The 4-MB models are WS-C2908-XL, WS-C2916M-XL, WS-C2924C-XL, and WS-C2924-XL. These switches can only be upgraded up to Cisco IOS Release 11.2(8.10)SA6
So, if you have one of the above models, the latest version is 11.2(8.10)SA6
If you have 8-MB Catalyst 2900 XL switches and 16-MB Catalyst 2900 LRE XL switches, then you can upgrade them to 12.0(5)WC15.
Please refer the "Hardware Requirements" in the below URL for details:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/2935wc15/ol256211.htm#wp84866
So, do check the amount of memory (4MB or 8MB) on the switch and then download the appropriate version.
I hope it helps.
Regards,
Arul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide