An urgent query AIR-BR1310G-E-K9

Answered Question
Sep 21st, 2006
User Badges:

Dear all,


i have some queries,please help me out


1. AIR-BR1310G-E-K9 wireless bridge, which has an integrated antenna can be connected to AIR-ANT19491? If yes then how?


2. If not then i searched and found that AIR-BR1310G-E-K9-R is compatible with it but are the connectors or the cable to connect them have to be ordered seprerately, or are they included in the above mentioned prodects.


It is a bit of an urgent problem i will appreciate the quick and prompt responses.


thanks.

Correct Answer by Rob Huffman about 10 years 11 months ago

Hi Wagas,


You are on the right track here. The AIR-BR1310G-E-K9 has an Integrated antenna and cannot be connected to the AIR-ANT19491.


The AIR-BR1310G-E-K9-R is compatible with the AIR-ANT19491 and comes with the appropriate RP-TNC connector. The Low Loss cable and Antenna have to be ordered separately.Here is the ordering information;


AIR-BR1310G-E-K9 = The Cisco Aironet 1300 Series Outdoor Access Point or Bridge features an 802.11g 2.4-GHz radio, which supports data rates up to 54 Mbps. With this option, a 13-dBi patch antenna is integrated into the ruggedized enclosure



Cisco Aironet 1300 Series Outdoor Access Point or Bridge with integrated patch antenna

Cisco IOS Software


Ships with:

Power cord (configurable)

100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector

48 VDC power injector (AIR-PWRINJ-BLR2=)

1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)

Roof Mount Kit available separately (AIR-ACCRMK1300=)



AIR-BR1310G-E-K9-R = A connectorized version of the Cisco Aironet 1300 Series Outdoor Access Point or Bridge provides professional installers with RP-TNC type connectors that allow the deployment of nodes with omnidirectional, sector, or high-gain dish antennas for custom installations


Cisco Aironet 1300 Series Outdoor Access Point or Bridge with RP-TNC type connector

Cisco IOS Software


Ships with:

Power cord (configurable)

100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector

48 VDC power injector (AIR-PWRINJ-BLR2=)

1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)

Roof Mount Kit (AIR-ACCRMK1300=) and Wall Mount Kit (AIR-ACCWAMK1300=) available separately

Optional 5-ft, 2.4-GHz RF jumper cable available separately

Antennas available separately


ANTENNAS FOR CISCO AIRONET 1300 SERIES OUTDOOR ACCESS POINT OR BRIDGE WITH RP-TNC TYPE CONNECTORS


AIR-ANT2414S-R1 Cisco Aironet 2.4-GHz, 14-dBi sector antenna

AIR-ANT2506 Cisco Aironet 2.4-GHz, 5.2-dBi omnidirectional mast-mount antenna

AIR-ANT241201 Cisco Aironet 2.4-GHz, 12-dBi omnidirectional mast-mount antenna

**AIR-ANT19491 Cisco Aironet 2.4-GHz, 13.5-dBi Yagi antenna**

AIR-ANT2410Y-R Cisco Aironet 2.4-GHz , 10-dBi Yagi antenna

AIR-ANT33381 Cisco Aironet 2.4-GHz, 21-dBi dish antenna

AIR-ANT3549 Cisco Aironet 2.4-GHz, 9-dBi patch antenna


**Antennas must be ordered separately**


AIR-CAB005LL-R Cisco Aironet 5-ft, low-loss, 2.4-GHz RF cable with RP-TNC connectors


From this good doc;


http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022198b.html


Hope this helps!

Rob


Please remember to rate helpful posts.....

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Thu, 09/21/2006 - 04:47
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Wagas,


You are on the right track here. The AIR-BR1310G-E-K9 has an Integrated antenna and cannot be connected to the AIR-ANT19491.


The AIR-BR1310G-E-K9-R is compatible with the AIR-ANT19491 and comes with the appropriate RP-TNC connector. The Low Loss cable and Antenna have to be ordered separately.Here is the ordering information;


AIR-BR1310G-E-K9 = The Cisco Aironet 1300 Series Outdoor Access Point or Bridge features an 802.11g 2.4-GHz radio, which supports data rates up to 54 Mbps. With this option, a 13-dBi patch antenna is integrated into the ruggedized enclosure



Cisco Aironet 1300 Series Outdoor Access Point or Bridge with integrated patch antenna

Cisco IOS Software


Ships with:

Power cord (configurable)

100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector

48 VDC power injector (AIR-PWRINJ-BLR2=)

1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)

Roof Mount Kit available separately (AIR-ACCRMK1300=)



AIR-BR1310G-E-K9-R = A connectorized version of the Cisco Aironet 1300 Series Outdoor Access Point or Bridge provides professional installers with RP-TNC type connectors that allow the deployment of nodes with omnidirectional, sector, or high-gain dish antennas for custom installations


Cisco Aironet 1300 Series Outdoor Access Point or Bridge with RP-TNC type connector

Cisco IOS Software


Ships with:

Power cord (configurable)

100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector

48 VDC power injector (AIR-PWRINJ-BLR2=)

1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)

Roof Mount Kit (AIR-ACCRMK1300=) and Wall Mount Kit (AIR-ACCWAMK1300=) available separately

Optional 5-ft, 2.4-GHz RF jumper cable available separately

Antennas available separately


ANTENNAS FOR CISCO AIRONET 1300 SERIES OUTDOOR ACCESS POINT OR BRIDGE WITH RP-TNC TYPE CONNECTORS


AIR-ANT2414S-R1 Cisco Aironet 2.4-GHz, 14-dBi sector antenna

AIR-ANT2506 Cisco Aironet 2.4-GHz, 5.2-dBi omnidirectional mast-mount antenna

AIR-ANT241201 Cisco Aironet 2.4-GHz, 12-dBi omnidirectional mast-mount antenna

**AIR-ANT19491 Cisco Aironet 2.4-GHz, 13.5-dBi Yagi antenna**

AIR-ANT2410Y-R Cisco Aironet 2.4-GHz , 10-dBi Yagi antenna

AIR-ANT33381 Cisco Aironet 2.4-GHz, 21-dBi dish antenna

AIR-ANT3549 Cisco Aironet 2.4-GHz, 9-dBi patch antenna


**Antennas must be ordered separately**


AIR-CAB005LL-R Cisco Aironet 5-ft, low-loss, 2.4-GHz RF cable with RP-TNC connectors


From this good doc;


http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022198b.html


Hope this helps!

Rob


Please remember to rate helpful posts.....

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode