09-21-2006 12:11 AM - edited 07-04-2021 01:07 PM
Dear all,
i have some queries,please help me out
1. AIR-BR1310G-E-K9 wireless bridge, which has an integrated antenna can be connected to AIR-ANT19491? If yes then how?
2. If not then i searched and found that AIR-BR1310G-E-K9-R is compatible with it but are the connectors or the cable to connect them have to be ordered seprerately, or are they included in the above mentioned prodects.
It is a bit of an urgent problem i will appreciate the quick and prompt responses.
thanks.
Solved! Go to Solution.
09-21-2006 04:47 AM
Hi Wagas,
You are on the right track here. The AIR-BR1310G-E-K9 has an Integrated antenna and cannot be connected to the AIR-ANT19491.
The AIR-BR1310G-E-K9-R is compatible with the AIR-ANT19491 and comes with the appropriate RP-TNC connector. The Low Loss cable and Antenna have to be ordered separately.Here is the ordering information;
AIR-BR1310G-E-K9 = The Cisco Aironet 1300 Series Outdoor Access Point or Bridge features an 802.11g 2.4-GHz radio, which supports data rates up to 54 Mbps. With this option, a 13-dBi patch antenna is integrated into the ruggedized enclosure
Cisco Aironet 1300 Series Outdoor Access Point or Bridge with integrated patch antenna
Cisco IOS Software
Ships with:
Power cord (configurable)
100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector
48 VDC power injector (AIR-PWRINJ-BLR2=)
1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)
Roof Mount Kit available separately (AIR-ACCRMK1300=)
AIR-BR1310G-E-K9-R = A connectorized version of the Cisco Aironet 1300 Series Outdoor Access Point or Bridge provides professional installers with RP-TNC type connectors that allow the deployment of nodes with omnidirectional, sector, or high-gain dish antennas for custom installations
Cisco Aironet 1300 Series Outdoor Access Point or Bridge with RP-TNC type connector
Cisco IOS Software
Ships with:
Power cord (configurable)
100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector
48 VDC power injector (AIR-PWRINJ-BLR2=)
1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)
Roof Mount Kit (AIR-ACCRMK1300=) and Wall Mount Kit (AIR-ACCWAMK1300=) available separately
Optional 5-ft, 2.4-GHz RF jumper cable available separately
Antennas available separately
ANTENNAS FOR CISCO AIRONET 1300 SERIES OUTDOOR ACCESS POINT OR BRIDGE WITH RP-TNC TYPE CONNECTORS
AIR-ANT2414S-R1 Cisco Aironet 2.4-GHz, 14-dBi sector antenna
AIR-ANT2506 Cisco Aironet 2.4-GHz, 5.2-dBi omnidirectional mast-mount antenna
AIR-ANT241201 Cisco Aironet 2.4-GHz, 12-dBi omnidirectional mast-mount antenna
**AIR-ANT19491 Cisco Aironet 2.4-GHz, 13.5-dBi Yagi antenna**
AIR-ANT2410Y-R Cisco Aironet 2.4-GHz , 10-dBi Yagi antenna
AIR-ANT33381 Cisco Aironet 2.4-GHz, 21-dBi dish antenna
AIR-ANT3549 Cisco Aironet 2.4-GHz, 9-dBi patch antenna
**Antennas must be ordered separately**
AIR-CAB005LL-R Cisco Aironet 5-ft, low-loss, 2.4-GHz RF cable with RP-TNC connectors
From this good doc;
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022198b.html
Hope this helps!
Rob
Please remember to rate helpful posts.....
09-21-2006 04:47 AM
Hi Wagas,
You are on the right track here. The AIR-BR1310G-E-K9 has an Integrated antenna and cannot be connected to the AIR-ANT19491.
The AIR-BR1310G-E-K9-R is compatible with the AIR-ANT19491 and comes with the appropriate RP-TNC connector. The Low Loss cable and Antenna have to be ordered separately.Here is the ordering information;
AIR-BR1310G-E-K9 = The Cisco Aironet 1300 Series Outdoor Access Point or Bridge features an 802.11g 2.4-GHz radio, which supports data rates up to 54 Mbps. With this option, a 13-dBi patch antenna is integrated into the ruggedized enclosure
Cisco Aironet 1300 Series Outdoor Access Point or Bridge with integrated patch antenna
Cisco IOS Software
Ships with:
Power cord (configurable)
100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector
48 VDC power injector (AIR-PWRINJ-BLR2=)
1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)
Roof Mount Kit available separately (AIR-ACCRMK1300=)
AIR-BR1310G-E-K9-R = A connectorized version of the Cisco Aironet 1300 Series Outdoor Access Point or Bridge provides professional installers with RP-TNC type connectors that allow the deployment of nodes with omnidirectional, sector, or high-gain dish antennas for custom installations
Cisco Aironet 1300 Series Outdoor Access Point or Bridge with RP-TNC type connector
Cisco IOS Software
Ships with:
Power cord (configurable)
100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector
48 VDC power injector (AIR-PWRINJ-BLR2=)
1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)
Roof Mount Kit (AIR-ACCRMK1300=) and Wall Mount Kit (AIR-ACCWAMK1300=) available separately
Optional 5-ft, 2.4-GHz RF jumper cable available separately
Antennas available separately
ANTENNAS FOR CISCO AIRONET 1300 SERIES OUTDOOR ACCESS POINT OR BRIDGE WITH RP-TNC TYPE CONNECTORS
AIR-ANT2414S-R1 Cisco Aironet 2.4-GHz, 14-dBi sector antenna
AIR-ANT2506 Cisco Aironet 2.4-GHz, 5.2-dBi omnidirectional mast-mount antenna
AIR-ANT241201 Cisco Aironet 2.4-GHz, 12-dBi omnidirectional mast-mount antenna
**AIR-ANT19491 Cisco Aironet 2.4-GHz, 13.5-dBi Yagi antenna**
AIR-ANT2410Y-R Cisco Aironet 2.4-GHz , 10-dBi Yagi antenna
AIR-ANT33381 Cisco Aironet 2.4-GHz, 21-dBi dish antenna
AIR-ANT3549 Cisco Aironet 2.4-GHz, 9-dBi patch antenna
**Antennas must be ordered separately**
AIR-CAB005LL-R Cisco Aironet 5-ft, low-loss, 2.4-GHz RF cable with RP-TNC connectors
From this good doc;
http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022198b.html
Hope this helps!
Rob
Please remember to rate helpful posts.....
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: