×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

QoS apply problem!!!!!

Unanswered Question
Sep 22nd, 2006
User Badges:

Hi friends,


I have this QoS configuration:


class-map match-all FTP

match protocol ftp


policy-map limitFTP

class FTP

shape average 1000000


policy-map parent

class class-default

service-policy limitFTP


map-class frame-relay test

service-policy output parent


interface serial1/2

frame-relay traffic-shaping


interface frame-relay 1/2.X

frame-relay interface-dlci X

class test


When I apply the last command ( class test on the sub-interface) I have this error:


GTS: Can be enabled only at the first level.


What is this? Can someone help me?


Thank you very much

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mheusinger Tue, 09/26/2006 - 07:11
User Badges:
  • Green, 3000 points or more

Hi,


you configure a nested policy-map, first level being "parent" second level being "limitFTP". With this construction you should use your shaper in the parent policy, as GTS has to be enabled on first level. In case you want to just limit FTP, your config could look like this:


class-map match-all FTP

match protocol ftp


policy-map limitFTP

class FTP

shape average 1000000


map-class frame-relay test

service-policy output limitFTP


interface serial1/2

frame-relay traffic-shaping


interface frame-relay 1/2.X

frame-relay interface-dlci X

class test


In case you want additional QoS features, then name them and we can adjust the policy to your needs.


Hope this helps! Please rate all posts.


Regards, Martin

bascheew Fri, 07/06/2007 - 22:38
User Badges:

How would this be done on a Dialer interface? The command:


map-class dialer class_name


doesn't give me the option to then apply a service policy to the map-class. Any other way to do this?

Actions

This Discussion