WCCP in 4507R

Unanswered Question
Sep 23rd, 2006

Hi ,

I'm trying to configure 4507R ( 12.2(31)SG )to run WCCP as shown in the attachments.

1- I enable WCCP globally

2- In users VLAN redierct HTTP in .

3- In bluecoat configuration is

wccp enable

wccp version 2

service-group web-cache

forwarding-type l2

password cisco

home-router X.X.X.X ( L3 port IP in 4507R).

interface 0

end

I got the following error

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

4d02h: WCCP-EVNT:S00: Here_I_Am packet from 10.25.50.1 w/bad rcv_id 00000000

Regards,

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ariela Sun, 09/24/2006 - 01:34

Hi,

Looks like the I_SEE_YOU packets never reaches ProxySG. Perhaps you have a

local firewall dropping the packets?

WCCP is using UDP port 2048 for the control channel.

Then be sure that the ip of

wccp router is correct.

Then try without:

forwarding-type l2

password cisco

and see the doc at

http://www.bluecoat.com/downloads/support/BCS_tb_implementing_WCCP.pdf

Please let me know

HTH

Andrea

katab Thu, 09/28/2006 - 03:54

Thank Andera ,

1- There is no firewall

2- I can Managet the Bluecocat from Users VLAN .

3- I tried with no password but no luck.

4- Cat4507R does not support GRE that is why I'm using forwarding-type l2 .

5- CoreSW1#sh ip wccp web-cache detail

WCCP Cache-Engine information:

Web Cache ID: X.X.X.X

Protocol Version: 2.0

State: NOT Usable

Redirection: L2

Packet Return: L2

Packets Redirected: 0

Connect Time: 00:02:11

AssigSW1#

Where X.X.X.X is the Bluecoat IP address.

Regards,

Actions

Login or Register to take actions

This Discussion

Posted September 23, 2006 at 9:26 AM
Stats:
Replies:2 Overall Rating:
Views:629 Votes:0
Shares:0
Tags: No tags.
 

Discussions Leaderboard

Rank Username Points
1
thisisshanky
2,069
2
pkhatri
1,746
3
ankurbhasin
1,704
4
gpauwen
1,629
5
Richard Burts
1,583
Rank Username Points
xavierchang@hot...
5
Nandan Mathure
5
thiland
5
aacole
5
shh5455
5