2006 boot - 'fail to open eeprom.dat'

s-sowell · ‎10-03-2006

2006 controller fails to boot, as follows:

Cisco AireOS Version 3.2.150.10

Initializing OS Services: Failed to open /mnt/application/eeprom.dat.

Cisco Crash Handler

This build was configured to copy this crash information to

a file called: "/mnt/application/mwar_dump1.crash"

I've not been able to find docs on this topic. Any help is appreciated! thanks,

Steve

wong34539 · ‎10-09-2006

The issue that you are observing in the WLC is indicating that the device is broken (unable to read the input from the EEPROM) and it needs to be replaced.

Aaron Harrison · ‎10-09-2006

Hi

See this URL:

http://www.cisco.com/en/US/customer/products/ps6308/products_field_notice09186a00807516b4.shtml

Might not be the same root cause, but it seems if that eeprom file is lost or corrupted your WLC needs to go back to Cisco...

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!