Access to DMZ

jrabinov · ‎10-05-2006

Our VPN 3015 concentrator connects to outside with its own router tru T1 serial interface. On inside it conects to the same backbone as PIX-525 firewall. When remote users connect to VPN, they cannot access any servers in DMZ. What setting should I change on concentrator or on PIX to get it fixed? I would appreciate any tips and advises.

jwalker · ‎10-05-2006

You need to do a couple of things on the concentrator..

1. Make sure you added the DMZ subnet to the Network List for your split tunneling.

2. Add a route on the Concentrator that sends all traffic for the DMZ subnet to the appropriate routing device.

*** Please rate if this helps in any way****

Cheers!

jrabinov · ‎10-06-2006

Thank you. It works great!