how to redistribute ibgp route to igp protocol.

Unanswered Question
Oct 7th, 2006
User Badges:

ibgp CAN'T inject route in eigrp or ospf,how can do it.think's

router eigrp 100


redistribute bgp 1 metric 100 1 255 1 1500



no auto-summary


router bgp 1

no synchronization

bgp log-neighbor-changes

neighbor remote-as 1

neighbor next-hop-self

no auto-summary


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Richard Burts Sat, 10/07/2006 - 08:53
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN


From the command reference:

bgp redistribute-internal

To allow the redistribution of iBGP routes into an interior gateway protocol such as IS-IS or OSPF, use the bgp redistribute-internal command in router configuration mode. To remove the bgp redistribute-internal command from the configuration file and restore the system to its default condition where the software does not allow the redistribution of iBGP routes into Interior Gateway Protocols (IGPs), use the no form of this command.



Edison Ortiz Sun, 10/08/2006 - 06:46
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member


The command should be under the BGP process, not the EIGRP process. Perhaps that's the reason you are unable to enter such command in your config.




This Discussion