×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Call Manager voicemail ports not rolling over

Unanswered Question

When more than one subscriber attempt to contact the unity voicemail, they receive a "not enough bandwidth" error. I have 16 ports configured on the call manager and they are all registered. The unity integration test shows that all ports are reachable. The voicemail ports are all forwared to the next DN. I have also forwarded the last DN to the first DN. I am also seeing in the event log that call waiting tone is detected on one of my voicemail ports. I can't find anywhere that call waiting is configured except on phone DNs. Any help would be appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Aaron Harrison Fri, 10/13/2006 - 07:46
User Badges:
  • Super Bronze, 10000 points or more
  • Community Spotlight Award,

    Member's Choice, May 2015

Hi


'not enough bandwidth' indicates that the device you are calling from is in a different 'location' to the VM ports, and that there isn't enough bandwidth between these two locations to allow the call. Verify that the devices involved are in the correct locations and that your locations CAC is set up correctly.


Regards


Aaron


Please rate helpful posts...

Actions

This Discussion