cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
639
Views
0
Helpful
3
Replies

Configuring VPN3030 Concentrator as EzVPN Server

Runner888
Level 4
Level 4

Hello,

I want to configure the VPN3030 concentrator as an EzVPN server to a C3845 router which will function as an EzVPN remote. Is there is a good tech note that shows how to do this on the VPN3030? Also, any insights to configuring the router for EzVPN remote is greatly appreciated as well. Thanks in advance.

Keith

1 Accepted Solution

Accepted Solutions

a.kiprawih
Level 7
Level 7

The following configuration example is between Cisco VPN 3000 and Cisco 1721 Router. Router configuration should be more or less similar.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800945cf.shtml

Hope this helps.

AK

View solution in original post

3 Replies 3

a.kiprawih
Level 7
Level 7

The following configuration example is between Cisco VPN 3000 and Cisco 1721 Router. Router configuration should be more or less similar.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800945cf.shtml

Hope this helps.

AK

Thank you very much for the tip. Much appreciated as always.

Runner888
Level 4
Level 4

Thank you very much for the tip. Much appreciated as always.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: