×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Multiple VLANs on L2 switch

Answered Question
Correct Answer by glen.grant about 10 years 10 months ago

Yes you can create multiples but you have to remember they will not be able to talk between them without a layer 3 device doing the routing.

Correct Answer by Adam Frederick about 10 years 10 months ago

You most certainly can!!


Create them through global config or VLAN database mode; I prefer global config, below is an example;


Router(config)#vlan 2,3,4,30


This will create VLANs 2,3,4 & 30.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Adam Frederick Sun, 10/22/2006 - 18:28
User Badges:
  • Bronze, 100 points or more

You most certainly can!!


Create them through global config or VLAN database mode; I prefer global config, below is an example;


Router(config)#vlan 2,3,4,30


This will create VLANs 2,3,4 & 30.

Correct Answer
glen.grant Mon, 10/23/2006 - 03:33
User Badges:
  • Purple, 4500 points or more

Yes you can create multiples but you have to remember they will not be able to talk between them without a layer 3 device doing the routing.

Actions

This Discussion