FAILURE id 1 len 14 msg is "RejectedJM"

Unanswered Question
Oct 24th, 2006
User Badges:

I am getting the error below on a ADSL WIC in a 1751 router, anyone know what it means?


Oct 10 11:55: 22.275: Vi2 LCP: State is Closed

Oct 10 11:55:22.275: Vi2 PPP: Phase is DOWN

Oct 10 11:55:22.275: Vi2 PPP: Phase is ESTABLISHING, Passive Open

Oct 10 11:55:22.275: Vi2 LCP: State is Listen

Oct 10 11:55:23.199: Vi2 LCP: I CONFREQ [Listen] id 2 len 15

Oct 10 11:55:23.199: Vi2 LCP: AuthProto CHAP (0x0305C22305)

Oct 10 11:55:23.199: Vi2 LCP: MagicNumber 0x9546E095 (0x05069546E095)

Oct 10 11:55:23.199: Vi2 PPP: No remote authentication for call-out

Oct 10 11:55: 23.199: Vi2 LCP: O CONFREQ [Listen] id 73 len 10

Oct 10 11:55:23.199: Vi2 LCP: MagicNumber 0x0910B1E9 (0x05060910B1E9)

Oct 10 11:55:23.203: Vi2 LCP: O CONFACK [Listen] id 2 len 15

Oct 10 11:55:23.203: Vi2 LCP: AuthProto CHAP (0x0305C22305)

Oct 10 11:55:23.203: Vi2 LCP: MagicNumber 0x9546E095 (0x05069546E095)

Oct 10 11:55:23.207: Vi2 LCP: I CONFACK [ACKsent] id 73 len 10

Oct 10 11:55:23.211: Vi2 LCP: MagicNumber 0x0910B1E9 (0x05060910B1E9)

Oct 10 11:55:23.211: Vi2 LCP: State is Open

Oct 10 11:55:23.211: Vi2 PPP: Phase is AUTHENTICATING, by the peer

Oct 10 11:55:23.211: Vi2 CHAP: I CHALLENGE id 1 len 37 from "RAS1NRP4.Douglas"

Oct 10 11:55: 23.215: Vi2 CHAP: Using hostname from interface CHAP

Oct 10 11:55:23.215: Vi2 CHAP: Using passworundebug all

Oct 10 11:55:23.215: Vi2 CHAP: O RESPONSE id 1 len 38 from "[email protected] "

Oct 10 11:55:23.243: Vi2 CHAP: I FAILURE id 1 len 14 msg is "RejectedJM"

Oct 10 11:55:23.243: Vi2 LCP: I TERMREQ [Open] id 1 len 4

Oct 10 11:55:23.243: Vi2 LCP: O TERMACK [Open] id 1 len 4

Oct 10 11:55:23.247: Vi2 PPP: Sending Acct Event[Down] id[5AB4]

Oct 10 11:55:23.247: Vi2 PPP: Phase is debug atm events

Oct 10 11:55:24.395: Vi2 LCP: I CONFREQ [TERMsent] id 1 len 15

Oct 10 11:55:24.395: Vi2 LCP: AuthProto CHAP (0x0305C22305)

Oct 10 11:55:24.395: Vi2 LCP: MagicNumber 0x9546ED04 (0x05069546ED04)

Oct 10 11:55:24.395: Vi2 LCP: Dropping packet, state is TERMsent

Oct 10 11:55:25.251: Vi2 LCP: Timeout: State TERMsent

Oct 10 11:55:25.251 : Vi2 LCP: State is Closed

Oct 10 11:55:25.251: Vi2 PPP: Phase is DOWN

Oct 10 11:55:25.251: Vi2 PPP: Phase is ESTABLISHING, Passive Open

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Richard Burts Tue, 10/24/2006 - 05:12
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

John


It looks to me like the messages indicate that a ppp session is being initialized, it gets to the authentication step (configured to use CHAP), that you send a password and that the other device rejects the password that you sent. The session is then torn down. I would suggest that you review your configuration and especially that you check the value of the password that you have configured with what the other device is expecting.


HTH


Rick

Actions

This Discussion