10-24-2006 05:05 AM - edited 03-03-2019 02:27 PM
I am getting the error below on a ADSL WIC in a 1751 router, anyone know what it means?
Oct 10 11:55: 22.275: Vi2 LCP: State is Closed
Oct 10 11:55:22.275: Vi2 PPP: Phase is DOWN
Oct 10 11:55:22.275: Vi2 PPP: Phase is ESTABLISHING, Passive Open
Oct 10 11:55:22.275: Vi2 LCP: State is Listen
Oct 10 11:55:23.199: Vi2 LCP: I CONFREQ [Listen] id 2 len 15
Oct 10 11:55:23.199: Vi2 LCP: AuthProto CHAP (0x0305C22305)
Oct 10 11:55:23.199: Vi2 LCP: MagicNumber 0x9546E095 (0x05069546E095)
Oct 10 11:55:23.199: Vi2 PPP: No remote authentication for call-out
Oct 10 11:55: 23.199: Vi2 LCP: O CONFREQ [Listen] id 73 len 10
Oct 10 11:55:23.199: Vi2 LCP: MagicNumber 0x0910B1E9 (0x05060910B1E9)
Oct 10 11:55:23.203: Vi2 LCP: O CONFACK [Listen] id 2 len 15
Oct 10 11:55:23.203: Vi2 LCP: AuthProto CHAP (0x0305C22305)
Oct 10 11:55:23.203: Vi2 LCP: MagicNumber 0x9546E095 (0x05069546E095)
Oct 10 11:55:23.207: Vi2 LCP: I CONFACK [ACKsent] id 73 len 10
Oct 10 11:55:23.211: Vi2 LCP: MagicNumber 0x0910B1E9 (0x05060910B1E9)
Oct 10 11:55:23.211: Vi2 LCP: State is Open
Oct 10 11:55:23.211: Vi2 PPP: Phase is AUTHENTICATING, by the peer
Oct 10 11:55:23.211: Vi2 CHAP: I CHALLENGE id 1 len 37 from "RAS1NRP4.Douglas"
Oct 10 11:55: 23.215: Vi2 CHAP: Using hostname from interface CHAP
Oct 10 11:55:23.215: Vi2 CHAP: Using passworundebug all
Oct 10 11:55:23.215: Vi2 CHAP: O RESPONSE id 1 len 38 from "secret@homesurfer "
Oct 10 11:55:23.243: Vi2 CHAP: I FAILURE id 1 len 14 msg is "RejectedJM"
Oct 10 11:55:23.243: Vi2 LCP: I TERMREQ [Open] id 1 len 4
Oct 10 11:55:23.243: Vi2 LCP: O TERMACK [Open] id 1 len 4
Oct 10 11:55:23.247: Vi2 PPP: Sending Acct Event[Down] id[5AB4]
Oct 10 11:55:23.247: Vi2 PPP: Phase is debug atm events
Oct 10 11:55:24.395: Vi2 LCP: I CONFREQ [TERMsent] id 1 len 15
Oct 10 11:55:24.395: Vi2 LCP: AuthProto CHAP (0x0305C22305)
Oct 10 11:55:24.395: Vi2 LCP: MagicNumber 0x9546ED04 (0x05069546ED04)
Oct 10 11:55:24.395: Vi2 LCP: Dropping packet, state is TERMsent
Oct 10 11:55:25.251: Vi2 LCP: Timeout: State TERMsent
Oct 10 11:55:25.251 : Vi2 LCP: State is Closed
Oct 10 11:55:25.251: Vi2 PPP: Phase is DOWN
Oct 10 11:55:25.251: Vi2 PPP: Phase is ESTABLISHING, Passive Open
10-24-2006 05:12 AM
John
It looks to me like the messages indicate that a ppp session is being initialized, it gets to the authentication step (configured to use CHAP), that you send a password and that the other device rejects the password that you sent. The session is then torn down. I would suggest that you review your configuration and especially that you check the value of the password that you have configured with what the other device is expecting.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide