ajagadee Wed, 10/25/2006 - 17:19
User Badges:
  • Cisco Employee,

Yes, it is possible.


For example:


crypto map TEST local-address Loopback0

crypto map TEST 10 ipsec-isakmp

set peer 192.168.1.1

set transform-set myset

match address 100

!

interface Loopback0

ip address 10.1.1.1 255.255.255.255


interface GigabitEthernet0/1

ip address 172.16.1.1 255.255.255.0

duplex auto

speed auto

crypto map TEST


And on the remote side, the peer will be the loopback address, which is 10.1.1.1


Reference:


http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tsec_r/sec_c3ht.htm#wp1264087


Let me know if it helps.


Regards,

Arul



Actions

This Discussion