HREAP Question

Answered Question
Nov 20th, 2006
User Badges:

Hi,


i am designing a centralised wirless network which consists of a AIR-WLC4404-100-K9 at the HQ and 50 sites which contain 1 or 2 AIR-LAP1131AG-E-K9.


Could you please confirm that HREAP comes with these AP's and that additional software does not need to be purchased. I know that with Aruba this is the case


Thanks

Correct Answer by jolmo about 10 years 9 months ago

Hi Nathan


H-REAP is supported only on the LWAPP-based 1131AG and 1242AG Access Points. Running 4.0 code or later, the 2000 and 4400 Series Controllers, Catalyst 3750G Integrated Controller Switch, Catalyst 6500 Series Wireless Services Module (WiSM), and Wireless LAN Controller Module (WLCM) for Integrated Services Routers (ISRs) all support this H-REAP functionality.


While there are limitations on how many H-REAPs can reside at a single site, there are no similar limitations on the number of H-REAPs supported by controllers. H-REAPs are treated the same as other access points when it comes to how many a given controller can support.


For more info:


http://www.cisco.com/en/US/products/ps6521/products_tech_note09186a0080736123.shtml


Hope this helps

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
jolmo Mon, 11/20/2006 - 03:32
User Badges:
  • Silver, 250 points or more

Hi Nathan


H-REAP is supported only on the LWAPP-based 1131AG and 1242AG Access Points. Running 4.0 code or later, the 2000 and 4400 Series Controllers, Catalyst 3750G Integrated Controller Switch, Catalyst 6500 Series Wireless Services Module (WiSM), and Wireless LAN Controller Module (WLCM) for Integrated Services Routers (ISRs) all support this H-REAP functionality.


While there are limitations on how many H-REAPs can reside at a single site, there are no similar limitations on the number of H-REAPs supported by controllers. H-REAPs are treated the same as other access points when it comes to how many a given controller can support.


For more info:


http://www.cisco.com/en/US/products/ps6521/products_tech_note09186a0080736123.shtml


Hope this helps

nathan.deane Mon, 11/20/2006 - 03:42
User Badges:

Brilliant,


I actually put the wrong part code in my original mail, and have included teh LWAPP enabled AP's.


Its good to know that i need code 4.0 or later..


Thanks for the clarification

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode