×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
zubairjalal Tue, 11/21/2006 - 02:25
User Badges:
  • Bronze, 100 points or more

Yes it is possible. What you can do is copy data from your existing flash to a tftp server and then copy the data from the tftp server to the other switch flash.


copy flash tftp is the command to copy from flash to tftp server


copy tftp flash is the command to copy from tftp server to flash.


Also, some IOS support the switch to become a tftp server. you need to check if your switch has the tftp server command...


--Pls rate if useful--

ankbhasi Tue, 11/21/2006 - 02:48
User Badges:
  • Cisco Employee,

Hi Suresh,


Which switch it is? There is also an option to configure switch directly as a tftp server and then copy the image from one switch directly to another switch.


http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c/fcprt2/fcaddfun.htm#3767


But not all switches and ios version support this.


HTH


Ankur


*Pls rate all helpfull post

Actions

This Discussion