×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

fastethernet hardware status down

Unanswered Question
Nov 28th, 2006
User Badges:

I have a 1400 Bridge connected to 1300 AP using 2940 switch. Things were working fine. When I reveiwed the IOS the fastethernet hardware status was DOWN. What some things to resolve this and bring back UP?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
scottmac Tue, 11/28/2006 - 17:15
User Badges:
  • Green, 3000 points or more

WHICH Fastethernet port is down (AP, Switch, or Bridge)?


Check the cabling, check the power injector / brick, try doing a shut / no shut on the affected interface, try another port of the switch (for both bridge and AP) ...


Some details would help a lot



Let us know


Scott


coreyrobinson Tue, 11/28/2006 - 22:20
User Badges:

I checked the cabling and switched the power injector. I also shut down and rebooted as well another switch.


The fastethernet port is down on the Bridge

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode