Monitoring VPN traffic per tunnel on Cisco ASA

jilahbg · ‎11-30-2006

Hi

I want to monitor the amount of traffic inside each Lan2Lan VPN-tunnel in Cisco ASA 5510, and I want to do it with MRTG or a clone.

I have found that this is possible through a CISCO-IPSEC-FLOW-MONITOR-MIB. (http://www.assure24.com/product/2965-snmp-mibs-download.htm)

However, I am not that familiar with SNMP Mibs. What I need is OID:s "1.2.3.4.5.6...." to enter into my SNMP management software. But I cant find these numbers in the url above.

How does all this MIB source code map to oid numbers? Someone that can explain?

Thanks in advance

/Jimmy

ssoberlik · ‎12-06-2006

Probably, you can use the monitoring section available in ASDM for monitoring the LAN-to-LAN tunnel traffic

merabtavart · ‎07-22-2011

Check

http://www.vpnttg.com/

Advantage of VPNTTG over other SNMP based monitoring software’s is following: Other (commonly used) software’s are working with static OID numbers, i.e. whenever tunnel disconnects and reconnects, it gets assigned a new OID number. This means that the historical data, gathered on the connection, is lost each time. However, VPNTTG works with VPN peer’s IP address and it stores for each VPN tunnel historical monitoring data into the SQL server and into the RRD (Round Robin Database) file.

HTH