VG224 SCCP Sample Configuration

Unanswered Question
Dec 4th, 2006
User Badges:

Does anyone have a sample SCCP configuration for a VG224 Gateway? I have the device set up in CallManager, but I know my configuration on the Gateway is probably not right. Can anyone help? Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Dave Agro Tue, 12/05/2006 - 07:02
User Badges:

Thanks for the reply...however this configuration is for MGCP, does anyone have one for SCCP?

thisisshanky Tue, 12/05/2006 - 07:09
User Badges:
  • Purple, 4500 points or more

Try this


stcapp ccm-group 1

stcapp

!

voice-port 2/1

caller-id enable

!

voice-port 2/2

caller-id enable

!

sccp local FastEthernet0/0

sccp ccm 1.1.1.1 identifier 1

sccp ccm 1.1.1.2 identifier 2

sccp

!

sccp ccm group 1

associate ccm 1 priority 1

associate ccm 2 priority 2

!

dial-peer voice 1pots

service stcapp

port 2/1

!

dial-peer voice 2 pots

service stcapp

port 2/2



HTH


Sankar.


PS: please remember to rate posts!

Dave Agro Tue, 12/05/2006 - 08:22
User Badges:

It's still not working correctly. Is there more to this config that is missing? As soon as I pick up the handset I get a busy signal.

thisisshanky Tue, 12/05/2006 - 08:47
User Badges:
  • Purple, 4500 points or more

Can you paste a sh sccp output ?.

Dave Agro Tue, 12/05/2006 - 09:04
User Badges:

SCCP Admin State: UP


Gateway IP Address: 10.1.40.6, Port Number: 2000


IP Precedence: 5


User Masked Codec list: None


Call Manager: 10.1.40.11, Port Number: 2000


Priority: N/A, Version: 3.1, Identifier: 11


Call Manager: 10.1.40.10, Port Number: 2000


Priority: N/A, Version: 3.1, Identifier: 10



SCCP application services(dspfarm profiles) are not enabled


or haven't associated to SCCP CCM group


Actions

This Discussion