12-05-2006 03:23 AM - edited 03-03-2019 02:55 PM
I need configure NAT for IOS router same like for PIX
PIX rule is following
static (inside,outside) 10.10.10.0 10.17.2220 netmask 255.255.55.0
so when user from outside is trying access to 10.10.10.x is NATed to inside 10.17.222.x
Thx
TJ
12-05-2006 03:31 AM
Hi
Pls go through this link .
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a0080091cb9.shtml
Hope this helps
regards
vanesh k
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
