×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

MGCP Gateway Failure

Unanswered Question
Dec 5th, 2006
User Badges:

Hi

We are CCM 4.1 with 2811 gateways running MGCP.

We have a route group of 3 gateways connecting via ISDN to the PSTN.


Outgoing calls are distributed round these gateways as "Round Robin" however when one of the gateways lost its registration to Call Manager we could not make any outgoing calls.

Is this behaviour correct or should the calls have gone out via the two remaining gateways.


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
gogasca Tue, 12/05/2006 - 20:23
User Badges:
  • Green, 3000 points or more

It should go to next Gateway.

We would need CCM|SDL detailed traces.

and make sure you have the following configured:

Goo to CCM Admin page > Service > Service Parameters > choose CallManager Service

> look for Clusterwide Parameters (Route Plan) > Stop Routing On User Busy

Flag* > Set it to FALSE > at the same place : Stop Routing on Unallocated Number

Flag* > set it to FALSE > update >



gajolly Wed, 12/06/2006 - 03:25
User Badges:

Yes, it should move on to the next gateway i think traces can be helpful..

may be we are not hitting the right group.

Actions

This Discussion