×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Rob Huffman Wed, 12/06/2006 - 16:28
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Gerard,


We don't use any 3700 series but according to the documentation the VIC2-4FXO is supported. Have a look;


Cisco 3700 Series Multiservice Access Routers

Relevant Interfaces and Modules


Analog Voice Interface Cards - VIC2-4FXO


From this doc;


http://www.cisco.com/en/US/products/hw/routers/ps282/products_relevant_interfaces_and_modules.html


IP Communications Voice/Fax Network Module Datasheet


From this doc;


http://www.cisco.com/en/US/products/hw/modules/ps5365/products_data_sheet09186a0080191d41.html


Hope this helps!

Rob

thisisshanky Wed, 12/06/2006 - 17:14
User Badges:
  • Purple, 4500 points or more

Also note that 3700s dont have onboard dsp slots, so you will need to rely on aim-voice-30 card if you want to use this card on a regular wic slot, or else use a NM-HDV2 to use that vic.


HTH


Sankar


PS: please remember to rate posts!

Actions

This Discussion