Routing and WebVPN

Unanswered Question
Dec 7th, 2006
User Badges:


I have a 1801 router directly connected to my ISP and on my LAN (with NAT). With SSL vpn to connect to my local network from internet. it's work perfectely but I would like to pass on the tunnel to acces to internet.

my local network is

the address pool for vpnconnexions is :

ip local pool webvpn-gw

this is the webvpn conf :



policy group default

functions svc-enabled

filter tunnel 100

svc address-pool "webvpn-gw"

svc default-domain "mshome"

svc keep-client-installed

svc dpd-interval gateway 30

svc homepage ""

svc rekey method new-tunnel

svc dns-server primary

svc dns-server secondary

default-group-policy default

gateway webvpn-gw



how to configure the router to route webvpn connexion to internet ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
irisrios Wed, 12/13/2006 - 12:29
User Badges:
  • Silver, 250 points or more

You can have more than one WebVPN gateway associated with a device. Each WebVPN gateway is linked to only one IP address on the router. You can create more than one WebVPN context for a particular WebVPN gateway. To identify individual contexts, provide each context with a unique name. One policy group can be associated with only one WebVPN context. The policy group describes which resources are available in a particular WebVPN context.


This Discussion