×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Multiple LAP types and VCI strings

Answered Question
Dec 8th, 2006
User Badges:

Hello,


I'm installing a WLC with 1232AG & 1240AG access points and i would like to know if it's possible to configure 2 different VCI strings for the same DHCP scope, or should I have a scope for each LAP type with the corresponding VCI string?


Thanks for the help

Correct Answer by ankbhasi about 10 years 8 months ago

Hi Friend,


You can have different VCI strings for same DHCP scopes. There are different models of LWAPP AP which use different VCI strings and all the APs can be in same DHCP scope.


HTH


Ankur


*Pls rate helpfull post

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
ankbhasi Fri, 12/08/2006 - 09:05
User Badges:
  • Cisco Employee,

Hi Friend,


You can have different VCI strings for same DHCP scopes. There are different models of LWAPP AP which use different VCI strings and all the APs can be in same DHCP scope.


HTH


Ankur


*Pls rate helpfull post

l.goncalves Fri, 12/08/2006 - 09:08
User Badges:

Hi Ankur,


Thanks a lot for the quick reply, I can now go on with my installation.


Have a nice week-end!


Luis

Actions

This Discussion