12-08-2006 08:28 AM - edited 07-03-2021 01:21 PM
Hello,
I'm installing a WLC with 1232AG & 1240AG access points and i would like to know if it's possible to configure 2 different VCI strings for the same DHCP scope, or should I have a scope for each LAP type with the corresponding VCI string?
Thanks for the help
Solved! Go to Solution.
12-08-2006 09:05 AM
Hi Friend,
You can have different VCI strings for same DHCP scopes. There are different models of LWAPP AP which use different VCI strings and all the APs can be in same DHCP scope.
HTH
Ankur
*Pls rate helpfull post
12-08-2006 09:05 AM
Hi Friend,
You can have different VCI strings for same DHCP scopes. There are different models of LWAPP AP which use different VCI strings and all the APs can be in same DHCP scope.
HTH
Ankur
*Pls rate helpfull post
12-08-2006 09:08 AM
Hi Ankur,
Thanks a lot for the quick reply, I can now go on with my installation.
Have a nice week-end!
Luis
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide