Not able to enable new 11G module

Unanswered Question
Dec 13th, 2006
User Badges:

after i upgrade my IOS to 123-8.

i plug-in a new 11g module into the AP1210.

the status shows hardware - down.

software status shows - disabled.

how do i enable the software status.



interface Dot11Radio0

no ip address

no ip route-cache

speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0

channel 2462

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
daylight28 Wed, 12/13/2006 - 19:07
User Badges:

solved my own prob.

did not assigned any ssid to my 11G radio.


Actions

This Discussion