PIX- policy for a source

Unanswered Question
ajagadee Fri, 12/15/2006 - 09:34
User Badges:
  • Cisco Employee,

Sundar,


Policy Based Routing is not supported on the Pix Firewall.


Also, dont get confused when you see the "route-map" command option in Pix 6.3 and higher. This command is applicable only when redistributing routes into OSPF.


Pix 6.3 Command Reference:


http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/mr.htm#wp1017196


Pix 7.2 Command Reference


http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_2/cmd_ref/qr_711.htm#wp1648744


Let me know if it helps.


Regards,

Arul


** Please rate all helpful posts **

Actions

This Discussion