×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

GLC-LH-SM problem between catalyst 4500 and 3750

Unanswered Question
Jan 3rd, 2007
User Badges:

I installed the same GLC-LH-SM module on a catalyst 4510 and a WS-C3750G-24TS. The module is recognized as LH on Cat4500 and as LX on Cat3750. Fiber has been tested several times and it is ok, but the link never comes up...I had to upgrade IOS version on cat3750 so it can recognize the module, actually its IOS is 12.2(25)see4 and on Cat4500 I have ios 12.2(31)SG. I read cat3750 supports this module, what am I missing?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
glen.grant Wed, 01/03/2007 - 15:39
User Badges:
  • Purple, 4500 points or more

Your code should be fine , make sure the transmit from one side goes to the recieve from the other side and vice versa . You may have to reverse the connector on one end of the patch cable.

ciscomv79 Thu, 01/04/2007 - 09:00
User Badges:

Thanks for your answer. We already tried reversing the cables, the ports never come up.

Actions

This Discussion