01-18-2007 08:03 AM - edited 03-14-2019 07:36 PM
Dear all,
I have a 2811 router with Callmanager Express. I am using a VIC-4FXS/DID card for Direct Inward Dial Call.
What is the procedure for setup DID?
Thanks.
01-18-2007 08:15 AM
Hi,
I assume you will be connecting this to a PBX configured for did. The configuration is as:
http://www.cisco.com/en/US/products/hw/routers/ps221/prod_configuration_guide09186a0080106d1b.html
I can just add that if you have more than one line going to the PBX, you might find useful configuring trunk groups.
01-19-2007 06:54 AM
I find that there is tcl script which provide did function for ccme. Is this work?
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2303.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
