new user on CCM 5.0

user-cisco · ‎01-22-2007

I have a CCM 5.0 on VMware, this is my first work on CCM 5.0, I loged on with the administrator account, then something like admin: appears, when I pressed (?) there are some linux commands like: set, file, utils,...

I simply want to log into callmanager main window locally, I've gotten stucked with no idea what to do ...

please help

user-cisco · ‎01-22-2007

any ideas please??!

thanks

thisisshanky · ‎01-22-2007

To configure callmanager, you need to use a web browser from your PC. The IP address of the callmanager you configured during the installation process, you need to use that ip to browse to the following address.

https:\\\ccmadmin.

Web login username should be CCMAdministrator and the password should be what ever you configured during installation.

CCM 5.0 runs on linux, so what you are seeing is the CLI of the callmanager and the commands you see are a limited set of OS administration commands.

HTH

Sankar

PS: please remember to rate posts!

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

user-cisco · ‎01-22-2007

so I can't open CCM main window locally on the server where this CCM installed??!!!

thisisshanky · ‎01-22-2007

On the server itself, only access is via CLI. Limited set of OS administration commands.

HTH

Sankar.

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus