×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

VPN load balancing not working correctly

Unanswered Question
Jan 23rd, 2007
User Badges:

I have two vpn3030s configured for load balancing. They appear to recognize one another as the correct vpn(priority 10) appears to be the master. The slave however keeps getting an error message i the log "LBSSF master peer[205.172.49.252] is not answering HELLO".

He appears to timeout the master and switch himself to master where he immediately sees the master and goes back to slave. I am not sure the address above is correct for the error message, 205.172.49.252 is the virtual IP shared by both concentrators. I would expect to see hellos sent and received between the two physical interfaces. Any ideas? I am getting a buffer error on the master as well so all this may be memory related. Not sure at this point.


Johnny

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion