cutoff last couple digits the calling number in 7960 IP phone

Unanswered Question
Jan 24th, 2007
User Badges:

when a call taken in 7960 IP phone two lines on the LCD. caller name in 1st line and calling number in 2nd.

The problem is cutoff the calling number in the case long digit by the timer box.

calling number



calling number on the 7960 LCD

case#1=9058881234<time counting>-->no cutoff

case#2=2829058881<time counting>-->cutoff the last three digits.

Any way to remedy to not cutoff the calling number(case#2)?

Advise please,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Wed, 01/24/2007 - 15:45
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi cjrchoi,

Most definitely, you cannot set the phone to eliminate the time box that covering the last digits. But you can setup a voice translation rule on your GW or in the CM to strip off the initial prefix, if present.

This way the number will fit on the display.


This Discussion