I'm converting a SupII MSFCII from hybrid to native. I get to step 16 in the conversion document (http://www.cisco.com/warp/public/473/catos-ios-conversion-6500k.pdf ) and I try to boot the RP with the command "boot sup-slot0: c6sup22-jsv-mz.121-8b.E20.bin"
It sits there for awhile and fails with the following:
ARP address resolution for 127.0.0.11 timed out ARP failed with failure code1 TFTP transfer aborted
TFTP: [timed out]
TFTP: operation terminated
Obviously the RP can't talk to the SP to get the code. Why would this happen? Can someone help?